-
Oct 20, 2026
Buying excavator undercarriage parts is not simply a matter of finding a low price. The right parts must match the machine, withstand the working conditions, and work correctly with the other components in the undercarriage system. A part that looks similar to the original may still have the wrong dimensions, pitch, mounting arrangement, or material properties. Before placing an order, buyers shou...
view more
-
Oct 20, 2026
Choosing an excavator undercarriage parts manufacturer is an important decision for equipment distributors, construction machinery dealers, repair companies, and heavy equipment fleet operators. The right manufacturer should do more than offer competitive prices. It should provide suitable product specifications, consistent manufacturing quality, reliable communication, and the ability to support ...
view more
-
Oct 21, 2026
Choosing an excavator undercarriage parts manufacturer is not just about finding a competitive price. The right supplier should be able to match parts to your machine, explain material and manufacturing specifications, maintain consistent quality, and deliver orders according to an agreed schedule. A low-priced component that does not fit correctly or wears out too quickly can cost more in downtim...
view more
-
Oct 22, 2026
An excavator track usually comes off because the track tension is incorrect, the front idler or track rollers are worn or misaligned, debris is trapped in the undercarriage, or the track chain and sprocket no longer work together properly. The best way to identify the cause is to stop the machine, inspect the entire track system, and check tension, alignment, wear, and damaged components before re...
view more
-
Oct 26, 2026
Excavator track rollers can leak oil or become unusually hot when their internal seals deteriorate, lubrication fails, track tension is incorrect, or operating conditions place excessive stress on the undercarriage. These problems are not always caused by the same component, so identifying the root cause is essential before deciding whether a roller needs repair or replacement. A leaking bottom ro...
view more
-
Oct 26, 2026
An excavator track chain can wear out before the sprocket when its pins and bushings experience excessive friction, lubrication problems, abrasive contamination, or incorrect track tension. However, the sprocket may also wear faster if the machine operates under heavy loads or the chain and sprocket do not engage correctly. The actual wear pattern depends on the machine, operating conditions, comp...
view more
-
Oct 28, 2026
How is the hardness of excavator undercarriage parts tested? Manufacturers typically use hardness testing equipment to measure how resistant a material is to indentation. The most suitable test method depends on the component material, surface condition, geometry, and heat-treatment requirements. Hardness testing is an important part of quality control for excavator undercarriage components such a...
view more
-
Oct 28, 2026
What causes excavator bucket teeth to fall off during operation? In most cases, the problem is related to a worn or damaged locking system, an incompatible tooth and adapter, incorrect installation, or excessive wear around the mounting area. Heavy impact and unsuitable digging conditions can also accelerate the problem. Excavator bucket teeth are designed to penetrate soil, gravel, rock, and othe...
view more
-
Oct 28, 2026
When an excavator undercarriage starts showing excessive wear, one common question is whether the drive sprocket or track chain should be replaced first. In many cases, the two components wear together because the sprocket teeth engage directly with the track chain bushings. Replacing only one worn component may shorten the service life of the new part if the other component is already beyond its ...
view more
ipv6 network supported 
sales & support 8613696958576
Email : binochen@yintparts.com
