-
Oct 26, 2026
Excavator track rollers can leak oil or become unusually hot when their internal seals deteriorate, lubrication fails, track tension is incorrect, or operating conditions place excessive stress on the undercarriage. These problems are not always caused by the same component, so identifying the root cause is essential before deciding whether a roller needs repair or replacement. A leaking bottom ro...
view more
-
Oct 26, 2026
An excavator track chain can wear out before the sprocket when its pins and bushings experience excessive friction, lubrication problems, abrasive contamination, or incorrect track tension. However, the sprocket may also wear faster if the machine operates under heavy loads or the chain and sprocket do not engage correctly. The actual wear pattern depends on the machine, operating conditions, comp...
view more
-
Oct 28, 2026
How is the hardness of excavator undercarriage parts tested? Manufacturers typically use hardness testing equipment to measure how resistant a material is to indentation. The most suitable test method depends on the component material, surface condition, geometry, and heat-treatment requirements. Hardness testing is an important part of quality control for excavator undercarriage components such a...
view more
-
Oct 28, 2026
When an excavator undercarriage starts showing excessive wear, one common question is whether the drive sprocket or track chain should be replaced first. In many cases, the two components wear together because the sprocket teeth engage directly with the track chain bushings. Replacing only one worn component may shorten the service life of the new part if the other component is already beyond its ...
view more
-
Nov 02, 2026
When choosing an excavator track roller, buyers often compare material, heat treatment, and hardness specifications. However, one important detail is sometimes overlooked: the difference between surface hardness and core hardness. These two properties affect different aspects of roller performance, and checking only one hardness value may not provide a complete picture of product quality. Surface ...
view more
-
Nov 02, 2026
Excavator track links operate under constant friction, heavy loads, and repeated impact. As the machine moves across rough ground, the track chain continuously engages with the sprocket, track rollers, and other undercarriage components. Over time, these forces can cause rail surface wear, pin and bushing wear, and changes in the overall track chain dimensions. Heat treatment is one of the most im...
view more
-
Nov 02, 2026
When purchasing excavator undercarriage parts, dimensional accuracy is one of the most important factors buyers should check before placing an order. A track roller or front idler may look correct from the outside, but even a small difference in installation dimensions can cause fitting problems, uneven track tension, abnormal wear, or premature component failure. So, how can buyers verify the dim...
view more
-
Nov 02, 2026
When purchasing excavator track shoe assemblies, buyers should look beyond the appearance of the steel track pads. A reliable assembly must meet the required material specifications, dimensional tolerances, hardness requirements, fastening standards, and overall manufacturing quality. Even a small defect in a track shoe or track link can affect installation, track alignment, and the service life o...
view more
-
Nov 02, 2026
When sourcing excavator and bulldozer spare parts, buyers need more than a competitive quotation and attractive product photos. They also need reliable documents that prove the supplier can manufacture parts according to the agreed specifications and maintain consistent quality throughout production. So, what documents should an excavator parts supplier provide for quality verification? At a minim...
view more
ipv6 network supported 
sales & support 8613696958576
Email : binochen@yintparts.com
