-
Oct 22, 2026
Uneven wear on excavator track rollers usually indicates that the undercarriage is not distributing load evenly or that some components are operating under different conditions. Common causes include incorrect track tension, worn or misaligned track components, uneven ground contact, repeated turning in one direction, abrasive materials, and differences in roller condition. The key to diagnosing u...
view more
-
Oct 26, 2026
Excavator track rollers can leak oil or become unusually hot when their internal seals deteriorate, lubrication fails, track tension is incorrect, or operating conditions place excessive stress on the undercarriage. These problems are not always caused by the same component, so identifying the root cause is essential before deciding whether a roller needs repair or replacement. A leaking bottom ro...
view more
-
Oct 26, 2026
An excavator track chain can wear out before the sprocket when its pins and bushings experience excessive friction, lubrication problems, abrasive contamination, or incorrect track tension. However, the sprocket may also wear faster if the machine operates under heavy loads or the chain and sprocket do not engage correctly. The actual wear pattern depends on the machine, operating conditions, comp...
view more
-
Oct 28, 2026
How is the hardness of excavator undercarriage parts tested? Manufacturers typically use hardness testing equipment to measure how resistant a material is to indentation. The most suitable test method depends on the component material, surface condition, geometry, and heat-treatment requirements. Hardness testing is an important part of quality control for excavator undercarriage components such a...
view more
-
Oct 28, 2026
What causes excavator bucket teeth to fall off during operation? In most cases, the problem is related to a worn or damaged locking system, an incompatible tooth and adapter, incorrect installation, or excessive wear around the mounting area. Heavy impact and unsuitable digging conditions can also accelerate the problem. Excavator bucket teeth are designed to penetrate soil, gravel, rock, and othe...
view more
-
Oct 28, 2026
Cracks in excavator bucket teeth and adapters are usually caused by a combination of impact loading, excessive digging force, unsuitable material properties, heat-treatment problems, and incorrect tooth-to-adapter fit. Repeated stress can gradually create small cracks that grow until a tooth or adapter breaks during operation. For excavator owners, fleet managers, and parts buyers, the key is to i...
view more
-
Oct 28, 2026
When an excavator undercarriage starts showing excessive wear, one common question is whether the drive sprocket or track chain should be replaced first. In many cases, the two components wear together because the sprocket teeth engage directly with the track chain bushings. Replacing only one worn component may shorten the service life of the new part if the other component is already beyond its ...
view more
ipv6 network supported 
sales & support 8613696958576
Email : binochen@yintparts.com
